[~H]/WSX1 IgeaCare_1 configuration file
[~S] COMMENTS/User comments
[d1]/Date /{00-CCC-0000}=01-JUN-2006/Enter the last date of modification
[l1]/Line 1 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Custom comments for personal use
[l2]/Line 2 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Custom comments for personal use
[l3]/Line 3 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Custom comments for personal use
[~S] PSWD/Passwords
\LOOP\@\0\2\Passwords (max 3)
[p@]/Password @/{CCCCCCCCCCCCCCC}=pwd-@/You can have up to three passwords stored on the WSX1 unit.
Passwords may contain spaces.
\ENDLOOP
[~S] CONFIG/General configuration
[sn]/sn /{CCCCCCCCCC}=WSX1/System name for report software
[pd]/pd /{CCCCCCCCC}={b_link,prolite,nil}/Protocol for displays
[bd]/bd /{CCC}={yes,no}/Beep when a call is displayed
(for b_link protocol only)
[ad]/ad /{CCC}={yes,no,jsm}/Use adressable displays
(yes is only supported for b_link protocol)
[im]/im /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=?/Installer message
(displayed at power up).
You should enter your company name.
[d00]/d00 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________00.../Display 0 idle message
(when there are no calls)
[d01]/d01 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________01.../Display 1 idle message
(when there are no calls)
[d02]/d02 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________02.../Display 2 idle message
(when there are no calls)
[d03]/d03 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________03.../Display 3 idle message
(when there are no calls)
[d04]/d04 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________04.../Display 4 idle message
(when there are no calls)
[d05]/d05 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________05.../Display 5 idle message
(when there are no calls)
[d06]/d06 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________06.../Display 6 idle message
(when there are no calls)
[d07]/d07 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________07.../Display 7 idle message
(when there are no calls)
[d08]/d08 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________08.../Display 8 idle message
(when there are no calls)
[d09]/d09 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________09.../Display 9 idle message
(when there are no calls)
[d10]/d10 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________10.../Display 10 idle message
(when there are no calls)
[d11]/d11 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________11.../Display 11 idle message
(when there are no calls)
[d12]/d12 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________12.../Display 12 idle message
(when there are no calls)
[d13]/d13 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________13.../Display 13 idle message
(when there are no calls)
[d14]/d14 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________14.../Display 14 idle message
(when there are no calls)
[d15]/d15 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}=__________15.../Display 15 idle message
(when there are no calls)
[~S] ATTRIB/Call type attributes
[mdt]/mdt /{0000}=180/Maximum call display time in seconds
[res]/res /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Reset string which will remove call from display
\LOOP\@\0\15\Call type attributes 00-15\1
[ty]/ty/{00}=@@/Call types/indexer
[be]/be/{0}={0,1,2,3}/One bell entry for each call type
(values from 0 to 3)
where :
0= no bell
1= short beeps(3)
2= modulated soft beeps
3= short beep (1)
[co]/co/{0}={0,1,2,3,4,5,6,7}/One color entry for each call type
(values from 0 to 7)
where :
0= Red (bright)
1= Red (less bright)
2= Orange
3= Yellow
4= Yellow
5= Yellow
6= Green
7= Green
Please note that type 15 color is also used for idle messages
[vk]/vk/{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Validation keyword
(this keyword must be present in message)
[ck]/ck/{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Displayed message
(displayed after room number)
\ENDLOOP
[~S] MAPPING/Floor to displays mapping
[d00]/d00 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 00.
[d01]/d01 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 01.
[d02]/d02 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 02.
[d03]/d03 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 03.
[d04]/d04 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 04.
[d05]/d05 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 05.
[d06]/d06 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 06.
[d07]/d07 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 07.
[d08]/d08 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 08.
[d09]/d09 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 09.
[d10]/d10 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 10.
[d11]/d11 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 11.
[d12]/d12 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 12.
[d13]/d13 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 13.
[d14]/d14 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 14.
[d15]/d15 /{CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC}/Enter floor number corresponding to display 15.
[~P]/***END***